SHURE FP33

Gyártó: SHURE

Elérhetőség: fogyóban

SHURE FP33
Bruttó ár:
759.900 Ft749.200 Ft

SHURE FP33
Hordozható Keverő

Measurement conditions, unless otherwise specified:

Operating Voltage: 18 Vdc Full gain
1 kHz input signal.
Output terminations: Line 600 ohms;Mic 150 ohms;
Tape Out 50 kilohms, Headphone 200 ohms
Frequency Response
20 to 20,000 Hz +/- 2.0 dB (channel controls centered).
Voltage Gain
InputLineMicHeadphonesTape
Low-Z mic
(150 ohms)
78 dB28 dB89 dB66 dB
Line28 dB-22 dB39 dB16 dB
Monitor----11 dB--
Inputs
InputImpedanceInput
Clipping Level
Designed
for use with
Actual
(internal)
Mic19 to 600 ohms1 kilohm-10 dBV
Line<10 kilohms50 kilohms+36 dBV
Monitor<1 kilohm10 kilohms+21 dBV
Outputs
InputImpedanceOutput
Clipping Level
Designed
for use with
Actual
(internal)
MicLow-Z inputs1 kilohm-31 dBV
Line600 ohms150 0hms+18 dBm
Tape>10 kilohms2.2 kilohms+3 dBV
Headphones8 to 200 ohms300 ohms+11 dBV
Total Harmonic Distortion
0.25% THD at +4 dBm output, 50 to 20,000 Hz.
Equivalent Input Noise
127 dBV with 150 ohm source, 20 to 20,000 Hz.
Output Noise
Master level fully CCW: < -100 dBV, 20 to 20,000 Hz.
Master level fully CW: < -80 dBV, 20 to 20,000 Hz.
Common Mode Rejection Ratio
65 dB at 100 Hz, ­20 dBV input.
Polarity
Mic/Line In to Mic/Line Out Non-Inverting
Mic/Line In to Headphones Non-Inverting
Mic/Line In to Tape Out Non-Inverting
Mic/Line to Mix Bus Inverting
Monitor In to Headphones Non-Inverting
Overload and Shorting
Shorted outputs, even for prolonged periods, cause no damage. Microphone inputs of up to 3 Vrms cause no damage. The Line and monitor inputs can withstand signals of up to 30 Vrms.
Input Channel Bi-Color LEDs
Green: Signal presence; visual indication of mix level.
Red: 6 dB below clipping level.
Output Peak/Limiter Bi-Color LEDs
Green: Output being limited by 1 dB or more.
Red: Output peak threshold reached; factory set at +17 dBm; user adjustable from 0 to 17 dBm.
Output Clipping Level
<+18 dBm at line output into 600 ohms
Low-Cut Filters
6 dB down at 150 Hz; 6 dB/octave slope
Pan Attenuation Level
45 dB
Tone Oscillator
1 kHz +/- 10%
Slate Tone Oscillator
400 Hz +/- 10%
Limiter
Threshold: Adjustable; 0 dBm to +15 dBm.
Attack Time: 1 ms
Release Time Constant: Selectable; 100 ms or 1 s
Indicator: Green when limiting by 1 dB or more
Microphone Power
12 V Phantom: 12 V through matched 680 ohms
48 V Phantom : 48 V through matched 6.8 kilohms
12 V T (A-B):12 V through matched 180 ohms
Mixer Power
Internal: Two 9 V alkaline batteries.
External: 12 to 30 Vdc to dc In jack; non-polarized.>
Current Drain: Approximately 41 mA (idle) at 18 V.
Battery Life: 8 hours minimum, typical.
Temperature Range
Operating: 0 degrees to 60 degrees C (32 degrees to 140 degrees F).
Storage: -40 degrees to 85 degrees C (-40 degrees to 185 degrees F).
Overall Dimensions (H x W x D)
58 mm x 184 mm x 161 mm (7-1/4 x 6-3/8 x 2-1/4 in.).
Net Weight (without batteries)
1.6 kg (3.5 lbs).

Címkék

SHUREFP33

Értékelések, vélemények

Ismeri, használja? SHURE FP33
Ossza meg véleményét a termékkel kapcsolatban!

Bruttó ár:
759.900 Ft749.200 Ft

Ezek is érdekelhetnek

Kosár
Tovább a kosárba
vásárolok még